Other headphones

Charge level via Handsfree

Warning

• Sometimes the charge level may not be displayed, try reconnecting the headphones.
• The headphones may disappear from the sound out list for 5-10 seconds.

Note

As long as this feature is enabled, the voice communication will be unavailable, you could not make the calls in applications like Skype, Discord and, etc using the headphone microphone.

Allows you to get the charge level using Handsfree profile. This method is suitable for most unsupported headphones. The accuracy of the charge level depends on the headphones.

Option	Description
On	Restart MagicPods to apply changes.
Off	Restart MagicPods to apply changes.

Tested on headphones

1. Xiaomi AirDots
2. WF-1000XM3

Battery is not displayed

If you are having trouble enabling HandsFree service or manual control it, follow these steps:

1. Turn off the Auto disable Handsfree feature of necessary headphones.
2. Open Control panel
3. Right click on Devices and Printers and choose Open
4. Select your headphones and check the Handsfree Telephony turned on.

Low audio latency

Note

Some Bluetooth drivers have already fixed this problem. If you do not experience a difference, disable this feature.

Reduces the delay between frequent switching on (play) and off (pause) of the sound. Useful when working in Premiere Pro or Audition. The feature can increase battery consumption because it prevents the headphones from going into standby mode.

Option	Description
On	—
Off	—

Auto play

Send the "Play" command after connecting the headphones. If there are no open players Windows will ignore the command.

Option	Description
On	—
Off	—

Auto pause

Pause playback after disconnecting headphones. Disconnecting headphones using MagicPods reduces the delay before pausing (By any method: button, tray menu or hotkey).

Option	Description
On	—
Off	—

Auto disable Handsfree

Note

Charge level via Handsfree will not work if HandsFree is disabled.

Tip

Disabling Handsfree will considerably speed up the headphone connection.

The Handsfree profile is used for voice communication and has poor microphone and sound quality. All Bluetooth headphones use this profile.

Option	Description
On	Immediately disables the Handsfree. The MagicPods will monitor and turn off the the Handsfree if it is turned on.
Off	Immediately enables the Handsfree. MagicPods will stop monitoring the Handsfree state.

Microphone doesn't work

If you are having trouble enabling HandsFree service or manual control it, follow these steps:

1. Turn off the Auto disable Handsfree feature of necessary headphones.
2. Open Control panel
3. Right click on Devices and Printers and choose Open
4. Select your headphones and check the Handsfree Telephony turned on.

Switch sound output to headphones

Force the sound output to switch to the headphones after connection. This option does not apply if Auto switch sound output is enabled.

Option	Description
On	—
Off	—

Low battery notification

Tip

• Turn on MagicPods in VoiceOver settings so low battery notifications are read out by a narrator.
• Customize the notification priority for MagicPods in Windows Notification Settings so low battery notifications are shown in Focus mode.

Show a notification when the headphone charge is below the specified value. The notification is displayed once for each connected headphones.

Option	Description
Enable	Slide the slider to the necessary value. When the charge level of headphones will be the same as the value or below the notification will appear.
Disable	Slide the slider to the left until the value text changed to off