Skip to content

Beats Studio Buds Plus⚓︎

MagicAAP features⚓︎

Note

Requires MagicAAP driver installation and MagicPods version 2.0.72.0 and above.

This section describes the features available with the MagicAAP driver installed.

Battery⚓︎

The charge level is displayed in 1% increments. To view the case charge level, place the headphones in an open case.

Battery⚓︎

The charge level is displayed in 10% increments. To view the case charge level, place the headphones in an open case.

Speeds up headphones searching time and ear detection (where supported). Switch this setting on only when no one else around you is using the same headphone model as yours.

Fast search is affected by the AirPods search radius parameter. The data of the headphones within this search radius will be used for the functions: charge level, ear detection.

If there are two or more the same headphone model in the search radius, the accuracy of the data may be reduced.

Low audio latency⚓︎

Reduces the delay between frequent switching on (play) and off (pause) of the sound. Useful when working in Premiere Pro or Audition. The feature can increase battery consumption because it prevents the headphones from going into standby mode.

Some Bluetooth drivers have already fixed this problem. If you do not experience a difference, disable this feature

Auto play⚓︎

Send the «Play» command after connecting the headphones. If there are no open players Windows will ignore the command.

Auto pause⚓︎

Pause playback after disconnecting headphones. Disconnecting headphones using MagicPods reduces the delay before pausing. (By any method: button, tray menu or hotkey)

Auto disable Handsfree⚓︎

Note

Show battery percentage will not work if HandsFree is disabled.

The Handsfree profile is used for voice communication and has poor microphone and sound quality. All Bluetooth headphones use this profile.

Option Description
On Immediately disables the Handsfree. The MagicPods will monitor and turn off the the Handsfree if it is turned on.
Off Immediately enables the Handsfree. MagicPods will stop monitoring the Handsfree state.

Tip

Disabling the Handsfree will speed up the headphone connection considerably

Microphone doesn't work⚓︎

If you are having trouble enabling HandsFree service or manual control it, follow these steps:

  1. Turn off the Auto disable Handsfree feature of necessary headphones.
  2. Open Control panel
  3. Right click on Devices and Printers and choose Open
  4. Select your headphones and check the Handsfree Telephony turned on.

Low battery notification⚓︎

Show a notification when the headphone charge is below the specified value. The notification is displayed once for each connected headphones.

You can customize the priority of notifications and allow notifications in focus mode in Windows Notification Settings.

Option Description
Enable Slide the slider to the necessary value. When the charge level of headphones will be the same as the value or below the notification will appear.
Disable Slide the slider to the left until the value text changed to off

Tip

To have the notification read out by a narrator, turn on MagicPods in the VoiceOver settings

Connect hotkey⚓︎

Global hotkey to connect or disconnect headphones.

Make sure that the specified hotkey is not used in other applications.