AirPods Pro 2⚓︎
MagicAAP features⚓︎
Note
Requires MagicAAP driver installation and MagicPods version 2.0.72.0 and above.
This section describes the features available with the MagicAAP driver installed.
Battery⚓︎
The charge level is displayed in 1% increments. To view the case charge level, place the headphones in an open case.
Noise control⚓︎
Switch between noise reduction modes when AirPods are worn
| Option | Description |
|---|---|
| Off | — |
| Transparency | — |
| Adaptive | AirPods Pro 2 only |
| Noise cancellation | - |
Cycle between⚓︎
Press the button on AirPods Max or press and hold the left or right AirPod on AirPods Pro to cycle between the selected noise control modes
| Option | Description |
|---|---|
| Off | — |
| Transparency | — |
| Adaptive | AirPods Pro 2 only |
| Noise cancellation | - |
Personalised volume⚓︎
Adjust the volume of media in response to your environment.
| Option | Description |
|---|---|
| On | — |
| Off | — |
Conversation awareness⚓︎
Lowers media volume and reduces background noise when you start speaking to other people.
| Option | Description |
|---|---|
| On | — |
| Off | — |
End call/Mute and unmute⚓︎
Call and microphone control during a call
| Option | Description |
|---|---|
| Press twice/Press once | Press twice to end call and press once to mute/unmute |
| Press once/Press twice | Press once to end call and press twice to mute/unmute |
Microphone⚓︎
The active AirPod microphone can automatically change from left to right, or be fixed to one side.
| Option | Description |
|---|---|
| Automatic | — |
| Always right AirPod | — |
| Always left AirPod | - |
Press speed⚓︎
Adjust the speed required to press two or three times on your AirPods.
| Option | Description |
|---|---|
| Default | — |
| Slower | — |
| Slowest | - |
Press and hold duration⚓︎
Adjust the duration required to press and hold on your AirPods.
| Option | Description |
|---|---|
| Default | — |
| Shorter | — |
| Shortest | - |
Noise cancellation with one AirPod⚓︎
Allow AirPods to be put in noise cancellation mode when only one AirPod in your ear.
| Option | Description |
|---|---|
| On | — |
| Off | — |
Tone volume⚓︎
Adjusts the volume of sound effects played by AirPods when no audio is playing. While «Low audio latency» is turned on, the volume won't be applied.
| Option | Description |
|---|---|
| 15 - 125% | Value 15-125% used by iPhone, but actual volume 15-80% |
Battery⚓︎
The charge level is displayed in 10% increments. To view the case charge level, place the headphones in an open case.
Fast search⚓︎
Speeds up headphones searching time and ear detection (where supported). Switch this setting on only when no one else around you is using the same headphone model as yours.
Fast search is affected by the AirPods search radius parameter. The data of the headphones within this search radius will be used for the functions: charge level, ear detection.
If there are two or more the same headphone model in the search radius, the accuracy of the data may be reduced.
Low audio latency⚓︎
Reduces the delay between frequent switching on (play) and off (pause) of the sound. Useful when working in Premiere Pro or Audition. The feature can increase battery consumption because it prevents the headphones from going into standby mode.
Some Bluetooth drivers have already fixed this problem. If you do not experience a difference, disable this feature
Auto play⚓︎
Send the «Play» command after connecting the headphones. If there are no open players Windows will ignore the command.
Auto pause⚓︎
Pause playback after disconnecting headphones. Disconnecting headphones using MagicPods reduces the delay before pausing. (By any method: button, tray menu or hotkey)
Auto disable Handsfree⚓︎
Note
Show battery percentage will not work if HandsFree is disabled.
The Handsfree profile is used for voice communication and has poor microphone and sound quality. All Bluetooth headphones use this profile.
| Option | Description |
|---|---|
| On | Immediately disables the Handsfree. The MagicPods will monitor and turn off the the Handsfree if it is turned on. |
| Off | Immediately enables the Handsfree. MagicPods will stop monitoring the Handsfree state. |
Tip
Disabling the Handsfree will speed up the headphone connection considerably
Microphone doesn't work⚓︎
If you are having trouble enabling HandsFree service or manual control it, follow these steps:
- Turn off the Auto disable Handsfree feature of necessary headphones.
- Open
Control panel - Right click on
Devices and Printersand chooseOpen - Select your headphones and check the
Handsfree Telephonyturned on.
Low battery notification⚓︎
Show a notification when the headphone charge is below the specified value. The notification is displayed once for each connected headphones.
You can customize the priority of notifications and allow notifications in focus mode in Windows Notification Settings.
| Option | Description |
|---|---|
| Enable | Slide the slider to the necessary value. When the charge level of headphones will be the same as the value or below the notification will appear. |
| Disable | Slide the slider to the left until the value text changed to off |
Tip
To have the notification read out by a narrator, turn on MagicPods in the VoiceOver settings
Connect hotkey⚓︎
Global hotkey to connect or disconnect headphones.
Make sure that the specified hotkey is not used in other applications.